and would like to pursue your masters or Ph.D degree, now is your chance. My wife, Dr. Mazura Jusoh from
, is searching for a few post graduate students and this is an opportunity for those who are interested.
The field is obviously Chemical Engineering which will focus on Separation Technology. To be more specific, you will explore the fundamental and science of
Progressive Freeze Concentration, a field which is still not explored in Malaysia.
Financial assistance will be provided for the first few students only. So, to grab hold of this offer, you need to act fast.
Masters duration - Full time research - 2 years.
Ph.D duration - 3 years.
Interested candidate can write and send your CV to the following email address:
mazura[alias]cheme.utm.my.Here is an example of a related study of this field...
Abstract : DEVELOPMENT OF A NOVEL DESIGN FOR PROGRESSIVE FREEZE CONCENTRATION PROCESSIndustrial wastewater may well be treated by freeze concentration, a process which freezes or crystallises out water content as pure
ice crystals and leaves behind a highly concentrated solution in a smaller volume. In conventional suspension freeze concentration (SFC) whereice crystals formed as a suspension in the mother liquor, separation of the solid-liquid mixture is difficult and costly. The size of ice crystals is still very limited and the seeding process requires usage of scraped surface
heat exchangers (SSFE), which is significantly expensive and accounted for approximately 30% of the capital cost. Progressive freeze concentration (PFC)
invented later is believed to provide cost saving and simplify the subsequent ice-liquid separation as ice crystals are formed as a layer or a block on the cooling surface. Quest for a design providing convenience and good efficiencies continues, and in this study a helical structured copper
crystalliser was developed and fabricated named Multi-wind Crystalliser (MWC). Effects of several operating conditions on the performance of MWC in context of wastewater
treatment were then investigated including circulation flowrate, initial solution concentration, coolant temperature and circulation time. The performance of the design was evaluated by three dependent variables including the effective partition constant, K, calculated from the volume and concentration of the solid and liquid phase. Two other parameters were ice purity and solution volume reduction. A process optimisation was also performed thereafter employing STATISTICA to produce optimum conditions in favour of the stated independent variables. As the crystalliser designed involves
heat transfer, the overall heat transfer coefficient was also calculated through temperature profiling subsequently generating a prediction model for
ice crystal mass. At the end of the research, a new crystalliser design for PFC is established and an observation of how the operating conditions affect the performance of the system was obtained. Optimum operating conditions was determined by process optimisation and an overallheat transfer coefficients were also generated. Adequacy and reliability of the ice crystal mass prediction model produced was proven by error analyses revealing relatively small errors.
-------------------------------------------------------------------
FREE Recommended magazines to get you updated with current engineering news
Have you downloaded my free "
Choosing Alternative Fuel" Ebook? If not, then please
download it
here. It's Free and on top of getting the free ebook, you'll get eCourse on Alternative Fuel. It's a good and easy way to add more valuable information to yourself.