• Engineering world
  • kata
    • kata lucu
    • kata bijak
    • kata mutiara
    • kata cinta
    • kata gokil
  • lucu
    • gambar lucu
    • pantun lucu
    • tebakan lucu
    • kata lucu
    • cerita lucu
  • berita
    • berita unik
    • berita politik
    • berita artis
    • berita aneh
  • kesehatan
    • asam urat
    • kanker
    • jantung
    • hepatitis
    • ginjal
    • asma
    • lambung
  • gambar
    • gambar unik
    • gambar lucu
    • gambar aneh
    • gambar animasi
    • video lucu
  • hoby
    • burung
    • ikan
    • piaraan
  • contoh
    • surat lamaran
    • recount text
    • descriptive text
    • curriculum vitae
    • deskripsi
  • video
    • video lucu
    • video hantu
    • video polisi
    • video totorial
    • video panas
    • video lagu
  • blog
    • SEO
    • template
    • script
    • widget
    • backlink
    • imacros
  • komputer
    • excel
    • macro excel
Home » Uncategories »
Boiler Explosion: What When Wrong? Part 2

Later the electrical and instrumentation department worked hard to dry everything at the control panel. The paint on top of the control panel were damaged and ripped off from the effect of hot caustic. The boilerman also worked hard to clean the mess and spillage in the surrounding area. The boiler was left for a while to let it cool down and dry.

Soon after about 2-3 hours, i guessed, instruction was given to start the boiler, at low fire mode, just to slightly heat up the mixture of caustic and water inside the boiler. The time was about 1430 Hrs, and I just arrived at the boiler and watching the boiler people doing their job. That was the time when the boiler exploded and produced such a terrifying sound!!

After investigation, it was found that burner A (it's a twin burner boiler), furnace backfired. The boilerman intended to run the burner at a low fire mode, but instead, without anybody realising, the burner which already contained with natural gas, straight away go to the high fire mode, which provided a big spark. That caused the explosion to occur which made the burner ripped off from the boiler body and created great damage around it. The boiler sequence actually when wrong, because of the short circuit in the control relay base from the earlier hot caustic spillage. When the short circuit occured undetected, the servo motor ignited the high fire mode, by passing the other sequence of low fire etc.

It costs a lot to repair the boiler. However, I solute our maintenance fitters, instrumentation and electrical technician, including boilerman because they work very hard to rectify and repair all the damage. Within a short period of time, about 36 hours, the burner (which was luckily can still be used) was re-attached at the boiler and all pipings, fittings, valves, gear etc was fixed back. We called some boiler expert to help us with the boiler sequence and start-up operation, and that cost some money too. Well, now the boiler is back in operation. And for sure, we'll be extra carefull from this moment to avoid similar or almost similar incident from occuring again.
I would definitely won't forget that moment. And another moral of the story, do not walk unnessarily nearby the boiler!!! Appreciate life...


Ditulis oleh Bidadari, Selasa, 17 Oktober 2006 07.27- Rating: 4.5

Judul :

Deskripsi : Boiler Explosion: What When Wrong? Part 2 Later the electrical and instrumentation department worked hard to dry everything at the control p...
keyword : ,

Belum ada komentar untuk " "

Posting Komentar

Posting Lebih Baru
Posting Lama
Beranda
Langganan: Posting Komentar (Atom)
Postingan Populer
  • Dipping Tape and Measuring Oil Tonnage
    In oil industry or oil plant, there are a lot of oil storage tanks available. It is vital for the oil company to know their daily oil stock ...
  • (tanpa judul)
    Density Estimation for 2-Phase Mixture What is a good correlation to estimate the density of a two-phase mixture that is mostly vapor or ope...
  • Industrial Tools at their Best
     What exactly are industrial tools? Let me provide my understanding on what industrial tools actually are. Briefly, industrial tools are equ...
  • Steam Trap Failure Issue
    As I read through the "Expert Q and A - Timely Detection of Steam Trap Failure " post in the Chemical Engineering Blog, I was cal...
  • Plate Heat Exchanger at Lonsdale Energy Corporation
    The following photos of equipments (which include plate heat exchangers) and information are taken/supplied by Mr. Douglas Dunn from BCExplo...
  • My Ph.D progress and some sharing
    After 2 months doing my research attachment in School of Chemical Engineering and Advance Material (CEAM), Newcastle University, I finally ...
  • Power Surge From Local Power Supplier
    There are simply a lot of problems in a processing or a production plant. I did mentioned a broad or general ideas on the problems before t...
  • Human Body Fun Facts
    Enough about chemical engineering stuff for a while. Let's look at some bio-cool stuffs for a moment. Look at your body. The human body ...
  • Wooden Cooling Tower Drift Eliminators Get Dirty
    The following photos illustrates the cooling tower infills and drift eliminators. That's why after some period of time we need to clean ...
  • How to Make Biodiesel From Algae
    While awareness of biodiesel and running diesel engines on vegetable oil is growing, you still have to get the oil from somewhere. The conve...

Info Engineering world ©